Commercial As-Built Drawings and BOMA Measurement Across Canada
UrbanMeasure measures commercial buildings and draws as-builts anywhere in Canada, including Quebec and the North. Drawings and BOMA reports usually arrive within three business days of the site visit.

Commercial as-builts and BOMA measurement across Canada
UrbanMeasure measures commercial buildings and draws as-builts anywhere in Canada. Our office is in Calgary, and we serve all of Canada, including Quebec and the North.
Drawings and BOMA reports usually arrive within three business days of the site visit.
Get a quote or call 1-844-504-4420.
Commercial as-built drawings
An as-built drawing shows a building the way it stands today, not the way it was drawn years ago. We measure on site and deliver CAD and PDF floor plans, measured with professional Leica DISTO lasers to BOMA standards (Leica DISTO D5, accurate to ±1 mm, manufacturer spec). Owners, architects, designers and property managers use them for renovations, tenant improvements, leasing and due diligence.
Commercial as-built floor plans | What a full as-built set includes
ANSI/BOMA measurement
A BOMA measurement gives landlords, tenants and appraisers one agreed floor area. We measure office, retail, industrial, multi-family, hospitality and mixed-use buildings and issue area certificates, including CRU certificates for retail units. We measure to the standard edition your lease or appraisal names.
BOMA measurements and area certificates | BOMA measurement FAQ
Also offered across Canada
Matterport 3D tours, LiDAR scanning, 3D rendered tours and site plans are offered across Canada too. Each is quoted by project.
Matterport tours | LiDAR scanning | 3D rendered tours | Site plans
Who we work with
Building owners and landlords, property managers, leasing agents and brokers, appraisers, architects, interior designers and contractors. See how we help leasing agents, appraisers and property managers.
How it works
- Send us the address, building type, size and any plans you have.
- We confirm the scope, the price and any travel in a written quote.
- We visit the building and measure it.
- You receive your files, usually within three business days of the site visit.
Which BOMA standard applies
Your lease or appraisal usually names the standard. These are the ones we measure to:
Not sure which one fits? Send us the lease clause and we will tell you. Also read usable vs rentable area and CRU area certificates.
Where we work
We serve all of Canada, including Quebec and the North, from our Calgary office at 4034 16 St SW. Travel outside Alberta is quoted per job. Residential services such as RMS measurements and real estate photography are offered in Alberta, BC and Saskatchewan only.
Get a quote
Send the property address and what you need, or call 1-844-504-4420.
Get an example
Take a look at what the end result could look like!
FAQ
Do you do commercial as-built drawings across Canada?
Yes. We serve all of Canada, including Quebec and the North. Send the address and building size and we will quote the job.
How much do commercial as-built drawings cost?
Commercial as-builts are $400 plus GST up to 1,000 sq ft, then $150 plus GST for each extra 500 sq ft. A 3,000 sq ft space is $1,000 plus GST. Spaces over 4,000 sq ft are quoted. Travel is quoted separately.
Is there a travel fee outside Alberta?
Travel outside Alberta is quoted per job. We confirm it in your quote.
How long does it take?
Drawings and BOMA reports usually arrive within three business days of the site visit. That is the same inside and outside Alberta.
What do I get with a commercial as-built?
You get CAD and PDF floor plans of the building as it stands today, measured with professional Leica DISTO lasers to BOMA standards (Leica DISTO D5, accurate to ±1 mm, manufacturer spec). If you also need site plans, LiDAR scanning or a Matterport tour, ask for them in the same quote.
What is a BOMA measurement?
A BOMA measurement is a floor area measurement made to an ANSI/BOMA standard. It gives landlords, tenants and appraisers one agreed figure for rentable and usable area.
Which BOMA standard applies to my building?
Offices use Z65.1, industrial buildings use Z65.2, multi-family and hospitality use Z65.4, retail uses Z65.5 and mixed-use buildings use Z65.6. Your lease or appraisal usually names the edition, and we measure to that one.
How much does a BOMA measurement cost?
BOMA work is quoted by building type, size and the standard you need. Send the address and what you have, and we reply with a price.
Do you issue area certificates for retail units?
Yes. A CRU area certificate records the gross leasable area of a retail unit under ANSI/BOMA Z65.5. We prepare them for malls and retail centres.
What do you need to give me a quote?
The property address, building type and size, any existing plans, and whether you need as-builts, BOMA measurements or both. A photo of the space helps.
Are Matterport tours, LiDAR scanning, 3D rendered tours and site plans offered across Canada too?
Yes. These commercial services are offered across Canada as well, and each is quoted by project.
Do you offer residential services outside Alberta, BC and Saskatchewan?
No. Residential services such as RMS measurements and real estate photography are offered in Alberta, BC and Saskatchewan. Commercial services are available across Canada.
Pricing
Commercial as-built drawings start at $400 plus GST.
- Up to 1,000 sq ft: $400 plus GST
- 1,001 to 1,500 sq ft: $550 plus GST
- 1,501 to 2,000 sq ft: $700 plus GST
- 2,001 to 2,500 sq ft: $850 plus GST
- 2,501 to 3,000 sq ft: $1,000 plus GST
- 3,001 to 3,500 sq ft: $1,150 plus GST
- 3,501 to 4,000 sq ft: $1,300 plus GST
- Over 4,000 sq ft: quoted
That is $400 for the first 1,000 sq ft and $150 for each extra 500 sq ft. Travel outside Alberta is quoted per job. BOMA measurements are quoted by building type, size and standard.
Travel within 49 km of our base is free. Beyond that, a flat travel fee from $50 to $250 is added at checkout based on distance.

